703 AIRPORT ROAD
BURLINGTON, WI 53105
262 763-5100
262 763-5125  fax

Repair Station  K2UR235X

PFlight_0265m.jpg

HOME PAGE CONTACT ORDER PILOT REPORTS NEW PRODUCTS
Wing Tip Strobe Light Kit


Knots 2U has compiled a package that includes all of the necessary parts to complete your wing tip strobe light installation, and we are offering it at the best price you are going to find anywhere! 

Kit Contents:
                              - Whelen HDA,CF Power Supply
                              - Whelen A650 PG/PR Nav/Strobe assemblies
                              - Whelen Shielded Wire kit with Connectors
                              - Whelen Installation Guide

Please specify either 14 or 24 volt when ordering.


picture of model hdacf, click to enlarge
MODEL HDA,CF SERIES
FAA-PMA APPROVED

T
he model HDA,CF series has the capacity for simultaneous flashing, alternate flashing or both. It is designed to operate one, two or three-strobe light heads. Operating the wingtip strobes in the alternating mode will provide an accumulated 42 joules of power to each light. When in the simultaneous mode, the accumulated power to each light is 21 joules. In the three light mode, the wingtips will flash simultaneous at an accumulated 21 joules each, they alternate with a third light operating at an accumulated 42 joules. Outlet #1 is a trigger selector. A switch mounted in place of the jumper will allow wingtip outlets 3 & 4 to be turned off, while the tail outlet #2 will remain on. This function is commonly used when the third light is for ground operations. This power supply will operate from 10 to 30 volts DC.

SPECIFICATIONS:
Power Consumption: 7.0 Amps @ 14 volts DC 3.5 Amps @ 28 volts DC          
Weight: 2.1 lbs. Length: 5.50" Width: 5.0" Height: 2.37"
Model Number: A413A,HDA-CF-14/28            
Part Number: 01-0770028-05            
Drawing Number: 70028  
picture of model a650pg, click to enlarge MODEL A650 PG/PR SERIES
FAA-TSO-C30b APPROVED
FAA PMA APPROVED


T
he model A650 PG/PR series equips the aircraft wing tip with anti-collision, and forward position lights. It can be used to convert non-Whelen position lights into a position/anti-collision light system. The small size allows for mounting into a wingtip enclosure if applicable. It is available in 14 or 28 volts, and comes in a radio-shielded version. The forward position lamp is 26 watts.

SPECIFICATIONS:
Position Lamp
Power Consumption:
2 Amps @ 14 volts DC 1 Amps @ 28 volts DC          
Weight: 0.6 lbs. Length: 4.0" Width: 2.7" Exposed Height: 2.4"
Drawing Number: 70054            
Model Number: Part Number: Description:
A650PG-14 01-0770054-00 position green, 14 volt
A650PG-28 01-0770054-01 position green, 28 volt
A650PR-14 01-0770054-02 position red, 14 volt
A650PR-28 01-0770054-03 position red, 28 volt